Standing seam Panel

Standing seam Panel


The JSM standing seam panel is a high end steel roofing profile. It’s hidden fastener system provides a desired aesthetic appeal. Standing Seam is available in 22 gauge to 26 gauge material in bare agalume or a wide variety of colours. The unidesigned clip fastening system allows for each panel to cover up the fastening of the panel laid previous, providing a fantastic looking roof that wows even the most critical judge of residential and commercial design. Standing seam panels can be curved to further increase their appeal. Curved standing seam panels are available in 22 gauge and 24 gauge with a 1-1/2″ rib height.

3d View of Standing seam Panel




26, 24


1/12 and greater (2"seam) or 2/12 and greater (1.5" seam)


3' to 50' (Longer when rolled on site)

Rib Height

1-1/2" or 2"


12" to 24" width

Fastener System

Hidden Fastener

Recommended Substrate

Solid Substrate


See fastener section for sizes and uses




See accessory section for more roofing accessories

Stock Colour Option

*** Colours are representative only, please visit your nearest branch for physical colour samples.


Wood Grain Stock Colours (COMING MAY 2024)

Textured Stock Colours

Installation Help

The Diamond Rib panel is relatively easy to install. Simply lay your first sheet on the opposite end of your building of the prevailing winds and follow the recommended fastener pattern to the right. The second sheet can be laid with one rib overlapping the first panel, as per the picture to the right, and follow that pattern for each corresponding panel. For more in depth installations advice on panels, flashing and accessories, download/print our installation guide below.

Recommended Fastener Patterns

Side Lap fasteners recommended when installing as roof panel

Pre Drilling sheets in bundles is not recommended during installation for any steel sheets as this can cause hot burs which can rust to the pre painted or bare sheet and create a rusting appearance around the drill holes.