Flex-O-Vent

Flex-O-Vent™ Universal Venting Material vents, protects and lasts like no other. While polyurethane products constantly expand (as they soak up water) and contract (as they dry out) causing them to disintegrate and fail. Its specially formulated polyester— manufactured from recycled material—prevents moisture absorption and holds together to help keep out pests. It’s also extremely durable, flame-resistant, clog-resistant, and tear-resistant.

Flex-O-Vent is not only an economical choice, it’s a long-term solution that provides plenty of cooling air flow, which is vital to meet building codes, reduce utility costs, and minimize long-term building damage caused by improper ventilation.

  • Won’t absorb moisture, which can freeze and block all ventilation

  • Strong adhesive for superior hold

  • Easy, one-person installation

  • ASTM testing: D1929, D737

  • Available in 10’ rolls

With Flex-O-Vent, one size fits most panels. Installation is a simple two-step process easily handled by one installer. Flex-O-Vent comes in easy-to-handle 10-foot rolls (mirroring most ridge cap lengths) or larger 20-foot rolls if you prefer. It is easily cut with scissors or utility knife and a double bead of M63 adhesive holds Flex-O-Vent securely in place until the ridge cap is installed.
Step 1
Make sure panel is free of dust and debris. If not pre-cut, cut 2” slot at ridge. Measure and mark where the ridge cap will sit on the panel.
Step 2
Start from the end of the ridge, rolling out Flex-O-Vent along the length of the ridge (both sides), making sure the vent sits “up-slope” from the edge of the ridge cap.
Step 3
Apply ridge cap, compressing material between the ridge cap and major rip. Fasten at the major rib using a screw gun set to at least 2700 rpm.