STANDARD PIPE FLASHING
Our Standard pipe flashing come with a flexible square base that is designed to form a seal on all types of roofing surfaces (including metal, plastic, tile, and more), and on almost any panel configuration and roof pitch, regardless of the pipe location. The clearly marked sleeve can be cut on-site to easily customize and precisely fit the pipe diameter you need. Standard pipe flashing are designed for the maximum resistance to weathering due to ozone and ultraviolet light.
Easy, on-site customization for superior fit
Sleeve flexibility absorbs vibration and pipe movement caused by expansion/contraction
Maximum resistance to ozone weathering
20-year standard warranty, available 35-year warranty available on Black EPDM
The first ICC-listed flashing for the metal building industry with a 35-year warranty (available on black EPDM only)
Installing pipe flashing is quick and easy. And customizing the fit is simple. Just follow the steps below.
Step 1
Choose the pipe opening and trim the sleeve.
Step 2
Apply metal roof caulking and slide the boot over the pipe and form to the roof profile.
Step 3
Fasten to the roof with appropriate fasteners to complete the installation.
PIPE FLASHING SIZES
| Part | Pipe Diameter |
|---|---|
|
MF#1 |
1/4″ to 2-1/2″ |
|
MF#2 |
1/4″ to 3″ |
|
MF#3 |
1/4″ to 5″ |
|
MF#4 |
3″ to 6-1/4″ |
|
MF#5 |
4-1/4″ to 7-1/2″ |
|
MF#6 |
5″ to 9″ |
|
MF#7 |
6″ to 11″ |
|
MF#8 |
7″ to 13″ |
|
MF#9 |
10″ to 19″ |
|
MF#10 |
15-3/4″ to 29-1/2″ |