Facebook-f Linkedin Pinterest Google

Low Rib Panel

Low Rib Panel

COMMON APPLICATIONS

The Low Rib Profile offers plenty of flexibility for your roofing and siding needs. With a 3/8″ low profile rib, this profile is capable of shaping itself over the curvatures on your building. Low Rib is an excellent choice for quonset buildings, barns and other curved roofing and siding applications.

3d View of Low Rib Panel

Use

Curved Roof/Wall/Liner

Gauges

29, 26

Coverage

36" width

Length

3' to 45'

Rib Height

3/8" on 9" centres

Fastener System

Exposed Fastener

​Recommended Substrate

Solid Substrate

Fasteners

See fastener section for sizes and uses

Flashing

See 3/8" flashing section for commonly used trim

Closures

Low Rib LT, Low Rib ST

Misc

See accessory section for more roofing accessories

Low Rib Spec Page
3/8" Flashing Guide
Low Rib Load Table
Exposed Fastener Install Guide

Stock Colour Option

*** Colours are representative only, please visit your nearest branch for physical colour samples.

SMP STOCK COLOURS

Wood Grain Stock Colours

Textured Stock Colours
29 Gauge Colour Chart
26 Gauge Colour Chart
24 Gauge Colour Chart
Woodgrain/Textured Colour Chart

Installation Help

The Low Rib panel is relatively easy to install. Simply lay your first sheet on the opposite end of your building of the prevailing winds and follow the recommended fastener pattern to the right. The second sheet can be laid with one rib overlapping the first panel, as per the picture to the right, and follow that pattern for each corresponding panel. For more in depth installation advice on panels, flashing and accessories, download/print our installation guide below.

Recommended Sheet Install Pattern

Exposed Fastener Panel Installation Guide

Recommended Fastener Patterns

Recommended Fastener Pattern

Recommended Fastener Pattern at Eaves, Ridges & Endlaps

Side Lap fasteners recommended when installing as roof panel

Pre Drilling sheets in bundles is not recommended during installation for any steel sheets as this can cause hot burs which can rust to the pre painted or bare sheet and create a rusting appearance around the drill holes.

involve today

Trusted by more than 650,000 happy people

Magna voluptatum dolorem! Dolores! Sociosqu commodo nobis imperdiet lacinia? Magni! Felis, elementum nobis imperdiet lacinia nobis imperdiet lacinia.

Join us now